Pool cue, Cuetec Avid Surge Jump, gray, 3/8×14

Pool cue, Cuetec Avid Surge Jump, gray, 3/8×14

268.00 

Availability: Available

Free delivery

Over 100 Euros, if there are no oversized products in your basket, free delivery is automatically selected on the checkout page.

Ingyenes szállítás

25 000 Ft felett, ha nincs túlméretes termék a kosaradban, automatikusan az ingyenes szállítás kerül kiválasztásra a pénztár oldalon.

Details

LIGHT YEARS AHEAD OF THE COMPETITORS.

As their name suggests, the AVID Surge series teasing cues provide an efficient and easy boost of energy. They are made using multi-layered, specially oriented glass fibers bonded to kiln-dried A+ grade maple core for unparalleled energy transfer. All AVID Surge JUMP cues feature a low deflection Power+ face and weigh a slim 9.50 ounces. Easily frees the white ball from obstacles in its path, especially with high-up teases. Thanks to advanced Technology, opponents will not be in a hurry to push security.  data-src=

  • Florian Kohler Editon – Gray Design
  • Surge Power Pro Taper
  • Silver and Blue Power Twist Rings
  • 15″ Surge Jump Grip
  • li>
  • Black collar and butt cap
  • Silver Cuetec and AVID butt cap logos
  • CT logo thread guards
  • Shaft: AVID Surge, low deflection, fiberglass teasing shaft
  • shaft length: 29”
  • Skin: Power+ phenol with glass cushion (extra hard)
  • Connection: 3/8×14 modified Cuetec thread (21.30 mm )
  • Shaft Ring: 1.5mm Black Phenolic
  • Weight: 9.50 oz
  • AVID CLEANING AND MAINTENANCE Maintenance of the Cuetec AVID nib surface. Cuetec AVID nibs should never be sanded or modified. Use of any abrasive material on the nib surface may damage the nib surface and weaken the nib’s glass composite bond layers and release potentially harmful materials. , which may be dangerous to your health. Any polishing, sanding, or treatment of the tip surface with abrasives or chemicals will void the tip’s warranty. Never use dusting powder or other nib treatment on the Cuetec AVID nib. You only need a few materials to clean the surface of the Cuetec AVID tip; Isopropyl alcohol (75% or higher) and two (2) clean soft wipes. Step 1. Remove dust and dirt from the tip with a soft Cloth Step 2. Apply a reasonable amount (75% or higher) of isopropyl alcohol to a clean, soft towel. Then work the towel up and down the length of the tip while moving your hand around the circumference. It is possible that the towel will show dirt. This is completely normal. Continue working the tip in the same motion until all areas have been thoroughly wiped, then allow some time for the surface to dry. Changing the skin on the Cuetec AVID shaft. Cuetec AVID tips have a light, white ferrule end. This design into the front structure of the AVID shaft makes it easier to replace the leather and increases its life. When changing the skin, it is important to clean and resurface the sheath. The minimum height of the shaft must be greater than 2mm to maintain the shaft’s warranty coverage. * Never allow a skilled “craftsman” to sand or modify the surface of the shaft when installing a new skin. Replacement of the Cuetec AVID tip ring. Although it is unlikely that a Cuetec AVID shaft ring will need to be replaced, it should be done by an authorized Cuetec repair center. This is necessary due to the complex nature of the binders used and to ensure that the glass composite adhesive layers of the tip are not damaged. To find an authorized repair center near you, contact customerservice@cuetec.com. AVID cue weight adjustment Cuetec AVID cues use a cartridge based weight system to adjust cue weight. Remove the stop using a 10mm hex key. After removing the bumper, insert a Phillips head screwdriver into the bottom, turning it to the left to remove the built-in weights. Cuetec Acueweights are available in .25 .oz, .05 .oz and 1.0 .oz increments. Refunds Cuetec AVID tips have a limited lifetime warranty against deformation. Abuse Cuetec AVID tips are not designed to tolerate significant lateral pressure. They should never be bent excessively, bumped against other objects, or treated with abrasives, whether solid or liquid. Stick diameter Cuetec AVID tip diameters should never be modified. Any kind of grinding or polishing can endanger the ultra-thin surface layer of the glass bond and immediately invalidate the warranty of the AVID tip.

    Scroll to Top